Application of thermal analysis to study composite materials

Authors

  • Iwona Sulima Institute of Technology, Pedagogical University of Krakow, ul. Podchorazych 2, 30-084 Krakow, Poland
  • Marta Homa Center for High-Temperature Studies, Foundry Research Institute, ul. Zakopiańska 7, 30-418 Krakow
  • Piotr Malczewski Institute of Technology, Pedagogical University of Krakow, ul. Podchorazych 2, 30-084 Krakow, Poland

DOI:

https://doi.org/10.7494/mafe.2015.41.2.71

Keywords:

Composite, Austenitic stainless steel, Differential Thermal Analysis (DTA), Thermogravimetric Analysis (TG)

Abstract

The results of corrosion studies of composite materials obtained by two state-of-the –art methods of powder metallurgy are presented in the article. The main goal of the studies was determination of high-temperature corrosion resistance of steel-matrix composites reinforced with 8 vol.% TiB2. Thermogravimetric analyses were conducted at 1100ºC in air in 24 h cycle. Microstructure of the composited after thermogravimetric studies was observed at scanning electron microscope.

Downloads

Download data is not yet available.

References

D. Yu. , M. Zhu, T. A. Utigard, M. Barati, TG/DTA study on the carbon monoxide and graphite thermal reduction of a high-grade iron nickel oxide residue with the presence of siliceous gangue, Thermochimica Acta, 575, 10 (2014) 1–11.

H.-J. Jagdfeld, R. Odoj, A new high-temperature coupling system for TG/DTA-MS, Thermochimica Acta, Volume 72, 1–2 (1984) 171–177.

M. Matos, J. M. Castanho , M. T. Vieira, Composite copper/stainless steel coated powders, Journal of Alloys and Compounds, 483, 1-2 (2009) 460-463.

M. E. Brown, Introduction to thermal analysis: techniques and applications, Ed. Chapman and Hall Ltd., London, 1988.

D. Schultze, Termiczna Analiza Różnicowa, PWN, Warszawa, 1974.

W. Szczepaniak, Metody instrumentalne w analizie chemicznej, PWN, Warszawa, 2002

A. Małecki, Wpływ różnych czynników na wyniki pomiarów DTA, Szkoła Analizy Termicznej, Zakopane, 1996.

W. Balcerowiak, Różnicowa kalorymetria skaningowa i termograwimetria – aspekty teoretyczne i praktyczne, V Szkoła Analizy Termicznej, Zakopane, 2008.

E. Gemelin, Report of the chairman of the scientific commissions and working groups, ICTAC News, 32, 2 (1999) 10-12.

F. Binczycki, J. Piątkowski, R. Przeliorz, Określenie temperatury i entalpii przemian fazowych w stopach Al-Si, Archives of Foundry, 6, 22 (2006) 64-70.

I. Sulima, P. Klimczyk, P. Malczewski, Effect of TiB2 particles on the tribological properties of stainless steel matrix composites. Acta Metallurgica Sinica (English Letter), 27, 1 (2014), 12–18.

I. Sulima, L. Jaworska, P. Figiel, Influence of processing parameters and different content of TiB2 ceramics on the properties of composites sintered by high temperature–high pressure (HT-HP) method. Archives of Metallurgy and Materials, 59, 1 (2014) 203-207.

I. Sulima, P. Figiel, P. Kurtyka, Austenitic stainless steel-TiB2 composites obtained by HP-HT method, Composites theory and practice, 12, 4 (2012) 245-250.

M. Homa, A. Siewiorek,„Wykorzystanie metody TG oraz SPM w badaniach wysokotemperaturowego utleniania, Nowe możliwości badawcze Instytutu Odlewnictwa, Małopolskie Centrum Innowacyjnych Technologii i Materiałów, 2011, ISBN 978-83-88770-70-8, 155-173.

St. Mrowec, Kinetyka i mechanizm utleniania metali, Wydawnictwo Śląsk, Katowice 1982.

A. Łukaszczyk, M. Pisarek, K. Rożniatowski, J. Banaś, Spektroskopowe badania powierzchniowych warstw anodowych otrzymanych na niskochromowych stopach Fe-Cr w 0,1M roztworze Na2SO4, Ochrona przed Korozją, 3 (2012) 150-163.

Downloads

Published

2015-11-18

How to Cite

Sulima, I., Homa, M., & Malczewski, P. (2015). Application of thermal analysis to study composite materials. Metallurgy and Foundry Engineering, 41(2), 71. https://doi.org/10.7494/mafe.2015.41.2.71

Issue

Section

Articles