RECLAMATION OF SPEND MOULDING SANDS WITH THE CARBOPHEN 8178 RESIN

Authors

  • Jadwiga Kamińska AGH University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland,
  • Angelika Kmita AGH University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland,
  • Joanna Kolczyk AGH University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland,
  • Sylwia Żymankowska-Kumon AGH University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland,

DOI:

https://doi.org/10.7494/mafe.2012.38.2.163

Keywords:

moulding sand, alpha-set technology, mechanical reclamation

Abstract

The aim of investigations was to collect the experimental data allowing the quality assessment of the reclaimed material obtained by means of the mechanical reclamation from spent sands with the Carbophen 8178 resin. The investigation program was as follows:

•   making the moulding sand with the Carbophen 8178 resin and its preparation for the primary reclamation,

•   carrying out the secondary reclamation of the spent sand in the experimental mechanical reclaimer, at several variable parameters (inclination, reclamation time, rotor rotational speed),

•   necessary instrumental tests of the reclaimed spent sand and the analysis of the obtained reclaimed materials.

Investigations were carried our for three positions of the apparatus: α = 0o, 3o, 6o. The reclamation was performed for each position at three rotational speeds of impact-abrasive elements. The reclamation process effects were checked after 5, 10, 15 and 20 minutes. The reclamation results for the average rotational speed of the rotor, being 700 rpm, are presented in the paper.

Downloads

Download data is not yet available.

References

Dańko J., Dańko R., Łucarz M.: Procesy i urządzenia do regeneracji osnowy zużytych mas formierskich. Wydawnictwo Naukowe AKAPIT, Kraków, 2007

Dańko R.: Podstawy teoretyczne i technologiczne doboru optymalnych sposobów regeneracji suchej zużytych mas odlewniczych. AGH – Wydział Odlewnictwa, Kraków, 2006, praca doktorska, nie publikowana

Praca zbiorowa: Możliwości ograniczenia i metod zagospodarowania odpadów

z procesów odlewniczych. Wydawnictwo Naukowe AKAPIT, Kraków, 2009

Dańko J., Holtzer M., Dańko R., Grabowska B.: Analiza i struktura odpadów

z krajowych odlewni. Archives of Foundry Engineering, 2 [B] (2008), 5-9

Luksa I.: Badanie regenerowalności zużytej masy rdzeniowej z żywicą CARBOPHEN 8178. AGH – Wydział Odlewnictwa, Kraków, 2009, praca magisterska, nie publikowana

Dańko R., Kamińska J.: Procesy regeneracji zużytych mas formierskich i rdzeniowych. Sesje Studenckich Kół Naukowych, Kraków, 2 (2009), 253

Dańko R., Kamińska J.: Assessment of reclamation of used sands from the alpha-set technology in the testing apparatus. Archives of Foundry Engineering, 9 [1] (2009),

-37

Dańko R.: Innovative developments in sand reclamation technologies. Metalurgija – Metallurgy 50 (2011), 2, 93-96

Dańko R.: Analysis of effectiveness of used sands reclamation treatment – in various technological devices. Archives of Foundry Engineering, 9 (2009), 4, 31-36

Kamińska J., Dańko J.: Investigation of the selected properties of dusts from the reclamation of spent sands with bentonite. Archives of Foundry Engineering, 11, (2011), 4, 177-181

Downloads

Published

2012-12-31

How to Cite

Kamińska, J., Kmita, A., Kolczyk, J., & Żymankowska-Kumon, S. (2012). RECLAMATION OF SPEND MOULDING SANDS WITH THE CARBOPHEN 8178 RESIN. Metallurgy and Foundry Engineering, 38(2), 163. https://doi.org/10.7494/mafe.2012.38.2.163

Issue

Section

Articles

Most read articles by the same author(s)