THE INFLUENCE OF IRON POWDER AND DISINTEGRATED STEEL SCRAP ADDITIVES ON THE SOLIDIFICATION OF CAST IRON

Authors

  • Dariusz Kopyciński
  • Józef Dorula

DOI:

https://doi.org/10.7494/mafe.2010.36.2.97

Keywords:

inoculation, cast iron, dendrites, structure, mechanical properties

Abstract

The study proves that by introducing the iron powder and disintegrated steel scrap to low-sulphur cast iron still before the inoculation carried out with a conventional graphitising inoculant, the mechanical properties similar to those obtained during the inoculation treatment carried out on cast iron with the recommended high sulphur content are achieved. The said operation increases the number of crystallisation nuclei for dendrites of the primary austenite. In this case, the iron particles act as substrates for the nucleation of primary austenite gp due to a similar crystallographic behaviour of the regular face centered cubic lattice The more numerous are the dendrites of primary austenite, the less free space is available in the interdendritic spaces for the formation of graphite eutectic grains, which makes the structure more refined (more eutectic grains) and the mechanical properties higher.

Downloads

Download data is not yet available.

References

McClure N.C., Khan A. U.,McGrady D.D., Womohel H.L.: Inoculation of grey cast iron, Transactions AFS. 65, 1957, 340-349

Merchant H.D., Toriello L.J., Wallace J.F.: Inoculation influence on grey cast iron structure at various carbon equivalences, Modern Castings. 33, 1961, 109-116

Filkins W.C., Stuhrke W.F., Matter D., Wallace J.F.: Grey cast iron inoculation and inoculants evaluation, Transactions AFS. 70, 1963, 882-895

De Sy A.: Oxygen, oxides, superheating and graphite nucleation in cast iron, Modern Castings, 52, 1967, 67-78

Lux B.: Nucleation and graphite in Fe-C-Si alloys, in Recent Research on Cast Iron, Gordon and Breach, 1968 New York - London - Paris

Fraś E., Lopez H.F., Podrzucki C.: The influence of oxygen on the inoculation process of cast iron, Int. J. Cast Metals Research, 13, 2000, 107-121

Olsen S.O., Skaland T., Hartung C: Inoculation of grey and ductile iron a comparison of nucleation sites and some practical advises, Elkem ASA, Foundry Products Division, 14-th International Baltic Conference Materials Engineering'2005

Dugic I., Dioszegi A., Svenson I.L.: The influence of inoculation on the metal expansion penetration with respect to the primary and eutectic solidification, Research report. School of Engineering - Jonkoping University, 2005, 1-22

Riposan I., Chisamera M., Stan S., Skaland T., Onsoien M.: Analysis of possible nucleation sites in Ca/Sr over-inoculated grey cast irons, Transactions AFS, 2001, 109, 1151-1162

Dioszegi A., Liu K.Z., Svensson J.L.: Inoculation of primary austenite in grey cast iron, Cast Metals Research, 2007, 20, 2, 68-72

Downloads

Published

2010-12-31

How to Cite

Kopyciński, D., & Dorula, J. (2010). THE INFLUENCE OF IRON POWDER AND DISINTEGRATED STEEL SCRAP ADDITIVES ON THE SOLIDIFICATION OF CAST IRON. Metallurgy and Foundry Engineering, 36(2), 97. https://doi.org/10.7494/mafe.2010.36.2.97

Issue

Section

Articles