MODELING OF NEAR-NET FORGING OF THIN-WALLED PARTS OF STRAIN RATE SENSITIVE ALLOY

Sylwia Bednarek; Jan Stańczak; Piotr Skubisz

doi:10.7494/mafe.2005.31.1.87

MODELING OF NEAR-NET FORGING OF THIN-WALLED PARTS OF STRAIN RATE SENSITIVE ALLOY

Authors

Sylwia Bednarek
Jan Stańczak
Piotr Skubisz

DOI:

https://doi.org/10.7494/mafe.2005.31.1.87

Abstract

xxx

Downloads

Download data is not yet available.

Downloads

PDF

Published

2005-06-30

How to Cite

Bednarek, S., Stańczak, J., & Skubisz, P. (2005). MODELING OF NEAR-NET FORGING OF THIN-WALLED PARTS OF STRAIN RATE SENSITIVE ALLOY. Metallurgy and Foundry Engineering, 31(1), 87. https://doi.org/10.7494/mafe.2005.31.1.87

Download Citation

Issue

Vol. 31 No. 1 (2005)

Section

Articles

Most read articles by the same author(s)

Piotr Chyła, Aneta Łukaszek-Sołek, Sylwia Bednarek, Paweł Chyła, CLOSED DIE FORGING OF TURBINE DISC TO FIX BLADES FROM INCONEL®718 , Metallurgy and Foundry Engineering: Vol. 37 No. 2 (2011)
Jan Sińczak, Aneta Łukaszek-Sołek, Sylwia Bednarek, Paweł Chyła, THE FORGING PROCESS OF AIRCRAFT ENGINES TURBINE BLADES , Metallurgy and Foundry Engineering: Vol. 36 No. 2 (2010)
Agnieszka Krawiec, Paweł Chyla, Piotr Chyla, Sylwia Bednarek, Agnieszka Łukaszek-Sołek, NUMERICAL ANALYSIS OF THE INFLUENCE OF LUBRICATION CONDITIONS ON THE FILLING PATTERN IN A COMPLEX PROCESS OF EXTRUDING PARTICULAR HIGH-MELTING MATERIALS , Metallurgy and Foundry Engineering: Vol. 38 No. 1 (2012)
Piotr Skubisz, Tadeusz Skowronek, Jan Sińczak, MICROSTRUCTURE OF MAGNESIUM ALLOY AZ31 AFTER LOW-SPEED EXTRUSION , Metallurgy and Foundry Engineering: Vol. 33 No. 2 (2007)
Jan Grzesiak, Jan Sińczak, Piotr Skubisz, NUMERICAL MODELLING OF EXTRUSION PROCESS IN SUPERPLASTIC FLOW RANGE , Metallurgy and Foundry Engineering: Vol. 32 No. 1 (2006)
Piotr Skubisz, Jan Sińczak, Paweł Chyła, REDUCTION OF DIE LOADING BY DIVIDED FLOW PATTERN IN THE FINISHER DIE WEB AREA , Metallurgy and Foundry Engineering: Vol. 34 No. 1 (2008)
Paweł Chyła, Sylwia Bednarek, Aneta Łukaszek-Sołek, Jan Sińczak, STRAIN DISTRIBUTION IN ECAP PROCESS WITH VARIOUS FRICTION CONDITIONS - NUMERICAL MODELLING , Metallurgy and Foundry Engineering: Vol. 36 No. 1 (2010)
Piotr Skubisz, Jan Sińczak, Sylwia Bednarek, Aneta Łukaszek-Sołek, EFFECT OF DEFORMATION DEGREE ON PROPERTIES OF FORGINGS AFTER THERMOMECHANICAL TREATMENT , Metallurgy and Foundry Engineering: Vol. 32 No. 2 (2006)
Jan Sińczak, Maciej Pietrzyk, Piotr Skubisz, Aneta Łukaszek-Sołek, MODELLING OF MICROSTRUCTURE DEVELOPMENT IN FORGING OF A WINDMILL SHAFT , Metallurgy and Foundry Engineering: Vol. 32 No. 1 (2006)
Paweł Chyła, Sylwia Bednarek, Aneta Łukaszek-Sołek, CHANNEL CROSS-SECTION INFLUENCE ON EFFECTIVE STRAIN DISTRIBUTION IN ECAP PROCESS , Metallurgy and Foundry Engineering: Vol. 43 No. 1 (2017)

1 2 > >>

MODELING OF NEAR-NET FORGING OF THIN-WALLED PARTS OF STRAIN RATE SENSITIVE ALLOY

Authors

DOI:

Abstract

Downloads

Downloads

Published

How to Cite

Issue

Section

Most read articles by the same author(s)

Developed By

Information