STRUCTURAL CONSTRUCTION OF THE HARDENERS WITH DIFFERENT HARDENING RATES INTENDED FOR GEOPOLIMER BINDER SYSTEMS USED FOR THE PREPARATION OF MOULDING SANDS

Authors

  • Artur Bobrowski AGH University of Science and Technology lub AGH University.
  • Beata Grabowska AGH University of Science and Technology, Faculty of Foundry Engineering
  • Karolina Kaczmarska AGH University of Science and Technology, Faculty of Foundry Engineering

DOI:

https://doi.org/10.7494/mafe.2015.41.3.115

Keywords:

geopolymers, hardeners, hardening rates, FTIR, structural studies

Abstract

The paper presents the results of structural investigations of hardeners series of different hardening rate of the geopolymer Geopol, manufactured by the Sand-Team Company. Studies showed that these hardeners have the similar chemical structure and that the hardening rate of the binder depends on the proper selection of the proportions of respective components.

Downloads

Download data is not yet available.

References

Pezarski F., Smoluchowska E., Izdebska – Szanda I.: The use of adhesives geopolimerowego for the production of cast iron alloys. Foundry Research Institute, No. 2 (2008), 19-34.

Fridrich R., Jelinek P.: Polysialates binders preparation and their influence to shear strength of foundry sand mixtures. Archives of Foundry Engineering, Iss. 2 vol. 8 (2008), 37-40.

Jelinek P., Skuta R.: Modifikovane sodne silikaty, nova alternativa anorganickych slevarenskych pojiv. Materials Engineering 10 (2003), 283-286.

M. Holtzer, D. Drożyński, A. Bobrowski, W. Plaza: Influence of binding rates on strength properties of moulding sands with the GEOPOL binder, Archives of Foundry Engineering, vol. 14 (2014). 37–40.

Burian A., Novotny J.: Production of molds and cores spoiwowym ecological system. Conference Materials Conference Foundry XI TECHNICAL 2008 Nowa Sól, 2008, 81-91.

M. Stachowicz, K. Granat, D. Nowak, Studies on the possibility of more effective use of water glass thanks to application of selected methods of hardening, Archives of Foundry Engineering, vol. 10 (2010), 135-140.

M. Stachowicz, K. Granat, D. Nowak, Effect of hardening method and structure of linking bridges on strength of water glass moulding sands, Archives of Foundry Engineering, vol. 10 (2010), 141-146.

Kęcki Z. Fundamentals of molecular spectroscopy, PWN, Warszawa 1992

Farinha J., Caiado M., Castanheiro J.E. Valorisation of glycerol into biofuel additives over heterogeneous catalysts, Materials and processes for energy: communicating current research and technological developments (a.m éndez-vilas, ed.), Formatex 2013, 424.

Gokulakumar B. ,Narayanaswamy R. Fourier transform – infrared spectra (FT-IR) analysis of root rot disease in sesame (sesamum indicum), Romanian J. Biophys., No. 3, Vol. 18 (2008), , 217–223.

Stuart B. H. Infrared spectroscopy: Fundamentals and applications, John Wiley&Sons Ltd, University of Technology, Sydney, Australia.

Romao Benedita M. V. et al. Characterization of the curing agents used in epoxy resins with TG/FT-IR technique. Polímeros No.2, vol.16 (2006), 94-98.

Holtzer M., Dańko R, et al, The assesment of harmfulness of binding materials used for a new generation of core and molding sands, AGH University of Science and Technology in Krakow. Akapit Publishing House, 2013 (in Polish).

Downloads

Published

2016-03-23

How to Cite

Bobrowski, A., Grabowska, B., & Kaczmarska, K. (2016). STRUCTURAL CONSTRUCTION OF THE HARDENERS WITH DIFFERENT HARDENING RATES INTENDED FOR GEOPOLIMER BINDER SYSTEMS USED FOR THE PREPARATION OF MOULDING SANDS. Metallurgy and Foundry Engineering, 41(3), 115. https://doi.org/10.7494/mafe.2015.41.3.115

Issue

Section

Articles

Most read articles by the same author(s)

1 2 > >>