CHANNEL CROSS-SECTION INFLUENCE ON EFFECTIVE STRAIN DISTRIBUTION IN ECAP PROCESS
DOI:
https://doi.org/10.7494/mafe.2017.43.1.31Keywords:
effective strain, homogeneity of strain, equal-channel angular pressingAbstract
This study compares the numerically determined strain distributions after the application of the method of equal-channel angular pressing. The calculations were performed for four variants of the channel cross-sectional shapes – square, circular, and two rectangular ones with the same transverse surface area. The calculation results have been demonstrated as maps of effective strain distribution in the stabilized process.
Downloads
References
Łukaszek-Sołek A., Sińczak J., Bednarek S.: The numerical modelling of strain distribution during ECAP process. Engineering and Education, Białka Tatrzańska, 14–16.11.2007, Eds. Paweł Kurtyka [et al.]: Problems of modern techniques in engineering and education. Pedagogical University of Cracow, Institute of Technology, 117–123
Segal V.I., Reznikov V.M., Drobyshevskiy A.Ye., Kopylov V.I.: Plasticheskaya obrabotka metallov prostym sdvigom. Metally, 1 (1981), 115–123 [Сегал В.И., Резников В.М., Дробышевский А.Е., Копылов В.И.:
Пластическая обработка металлов простым сдвигом. Металлы, 1 (1981), 115–123]
Iwahashi Y., Wang J., Horita Z., Nemoto M., Langdon T.G.: Principle of Equal-Channel Angular Pressing for the Processing of Ultra-Fine Grained Materials. Scripta Materialia, 35, 2 (1996), 143–146
Goforth R.E., Hartwig K.T., Cornwell L.R.: Severe Plastic Deformation of Materials by Equal Channel Angular Extrusion (ECAE). In: Lowe T.C. and Valiev R.Z. (eds.): Investigations and Applications of Severe
Plastic Deformation. NATO Science Series, vol. 80, Series 3: High Technology, Springer Netherlands 2000, 3–12
Petrov P., Petrov M., Vasileva E., Dubinchin A.: Research on Friction during Hot Deformation of Al-Alloys at High Strain Rate. http://esaform2008.insa-lyon.fr/proceedings/MS18/p_Pe_255.pdf [28.06.2008]