ALUMINUM FOAMS GLUING

Authors

  • Adam Sajek West Pomeranian University of Technology, Szczecin

DOI:

https://doi.org/10.7494/mafe.2013.39.2.15

Keywords:

glue joint, aluminum foams, gluing, mechanical tests

Abstract

The paper presents an example of design solution of aluminum goam glue joint using twocomponent epoxy glue. The joint principles for distribution forces and stresses in the tensile sample were formulated. Recommendations for surface preparation of foam and gluing procedure aimed at control the porosity of the foam and glued surface roughness were established. As a result of strength test defined joint destruction mechanism was proposed. It was suggested that optimized joint design improving its properties.

Downloads

Download data is not yet available.

Author Biography

Adam Sajek, West Pomeranian University of Technology, Szczecin

References

Grabian J.: Metalowe piany kompozytowe w przemyśle okrętowym. Szczecin 2012

Ashby M.F., Evans A.G., Fleck N.A., Gibson L.J., Hutchinson J.W., Wadley H.N.G.: Metal Foams: A Design Guide. Butterworth-Heinemann 2000

Sedliaková N., Simančík F., Kováčik J., Minár P.: Joining of Aluminium Foams. Metallschäume: Proc. of Symposium Metallschäume, Bremen 3/1997

Bartolucci S.: Commercial application of aluminium honeycomb and foam in load bearing tubular structures. Massachusetts Institute of Technology, 9/2004 (thesis)

Degischer H. P., Kriszt B.: Handbook of cellular metals: production, processing, applications.Wiley-VCH Verglag GmbH, Weinheim 2002

Olurin O. B., Fleck N. A., AshbyM. F.: Joining of aluminium foams with fasteners and adhesives.Journal of Materials and Science 35, 2000, pp. 1079–1085

Burzer J., Bernard T., Bergmann H. W.: Joining of aluminium structures with aluminium foams. 1998 MRS Spring Meeting

Krajewski S., Nowacki J.: Preparation of Aluminium Foam Edges For Welding. Advances in Materials Science, 13, 3(37), September 2013, pp. 64–75

Nowacki J., Grabian J., Krajewski S.: Problemy lutowania pian aluminiowych. Przegląd Spawalnictwa, 1, 2014, pp. 7–12

Panowicz R., Kołodziejczyk D., Sybilski K., Barnat W., Niezgoda T.: Analiza numeryczna dynamicznego oddziaływania fali ciśnienia na złożoną strukturę panelu energochłonnego. Przegląd Mechaniczny, 11, 2012, pp. 40–45

Klasztorny M., Małachowski J., Dziewulski P., Nycz D., Gotowicki P.: Badania eksperymentalne i modelowanie piany aluminiowej ALPORAS. Modelowanie inżynierskie, 42, 2012, pp. 97–112

Downloads

Published

2013-12-31

How to Cite

Sajek, A. (2013). ALUMINUM FOAMS GLUING. Metallurgy and Foundry Engineering, 39(2), 15. https://doi.org/10.7494/mafe.2013.39.2.15

Issue

Section

Articles