VISION METHODS OF EXAMINING THE CLEANLINESS OF TEXTILE MATERIALS

Authors

  • Olga PARASKA Khmelnitsky National University
  • Andrzej SIOMA AGH University of Science and Technology
  • Svitlana KARVAN Khmelnitsky National University

DOI:

https://doi.org/10.7494/mech.2012.31.1.44

Keywords:

control, nano-scanning, soiled, fabric, dirty

Abstract

This article discusses methods of assessment for the cleanliness of materials made of cotton and polyester soiled with oil and pigment. Cleanliness tests were carried out using the vision method as well as nanometre-scale exa­mination of fibre surface, and their results presented. This article describes a method of image analysis and the adopted indices associated with cleanliness visible on the image of the tested material. Also, nanometre-scale ima­ges of fibre surfaces were presented, with the differences between clean and filthy fibres pointed out.

Downloads

Download data is not yet available.

References

Fedorova A.F. 2005, Technology of dry-cleaning, Moscow, 560 p.

Karvan S.A., Bubencshikova G.T., Paraska O.A. 2003, Soil removal of various nature from textile materials in the processes of dry-cleaning, Problems of Light and Textile Industries of Ukraine, No. 1(7), pp. 37-39.

Paraska O.A., Karvan S.A., Kulakov O.I. 2006, Analysis of measuring methods of washing ability of surfactants, Visnik KNUTD, No. 2, pp. 83-87.

Paraska O.A., Karvan S.A. 2010, Research of properties of textile materials after treatment in aqueous and nonaqueous mediums, Problems of Light and Textile Industries of Ukraine, No. 1(16), pp. 35-38.

Paraska O.A. 2010, Modern methods of investigation of surface of textile

materials, Light Industry, No. 3, pp. 48-49. Volkov V.A. 1985, Surface-active substances in detergents and dry-cleaning, Moscow, 200 p.

Sioma A. 2011, Modelowanie i symulacja realizacji procesu technologicznego [Modelling and simulation of processes] Mechanik miesięcznik naukowo-techniczny, ISSN 0025-6552, No. 12, p. 990.

Sioma A. 2010, Zastosowanie systemów wizyjnych 3D w kontroli jakości wykonania elementów pneumatyki i hydrauliki [Using 3D vision systems in the quality inspection of pneumatic and hydraulic components] Pneumatyka, ISSN 1426-6644, No. 1, pp. 27-30.

Kowal J., Sioma A. 2010, Metoda budowy obrazu 3D produktu z wykorzystaniem systemu wizyjnego [Construction of a 3D image of a product using a vision system] Acta Mechanica et Automatica, ISSN 18984088, Vol. 4, No. 1, pp. 48-51.

Kowal J., Sioma A. 2009, Active vision system for 3D product inspection. Learn how to construct three-dimensional vision applications by re-viewing the measurements procedures, Control Engineering USA, vol. 56, pp. 46-48.

Downloads

Published

2012-03-23

Issue

Vol. 31 No. 1 (2012)

Section

Articles

License

Remember to download, sign, scan and attach the copyright notice

This file should be uploaded as a Supplementary file (Step 4) of the submission procedure.