Connecting Castings for Operation under Conditions of Cyclic Temperature Changes

Authors

  • Andrzej Drotlew
  • Bogdan Piekarski West Pomeranian University of Technology

DOI:

https://doi.org/10.7494/jcme.2020.4.1.16

Abstract

The separable connections used in technological equipment of heat treatment furnaces (OTP) are described in this
study. The equipment is used for the heat treatment of charges, i.e. for the thermal and thermo-chemical treatment of parts of machines and devices. OTP is used for the charge formation and its transport before, during and after heat treatment operations. Accessories of this type are usually compact structures composed of several or several dozen cast elements. The main components are grates and pillars, which form an outer contour of the OTP and also allow for the correct arrangement of heat-treated parts. To form a relatively rigid structure composed of the grates and pillars, it is necessary to join these components together. For this purpose, various types of separable connections are used, mainly of a cylindrical shape with threaded parts. The subject of this study is focused on the construction and operating conditions of typical OTP structures, as well as the methods of fastening the pillar in a grate, i.e. on the design of the bottom part of the pillar and the hole in the grate in which this pillar is embedded.

Downloads

Download data is not yet available.

References

Steinkusch W. (1985). Verbesserte Werkstoff und Konstruktionen verringern Betriebskosten bei der Wärmebehandlung. Fachberichte Hütten. Metall. 23, 746–749.

Piekarski B. (2012). Odlewy ze stopów żarowytrzymałych w piecach do obróbki cieplnej. Szczecin: Wydawnictwo Uczelniane ZUT w Szczecinie.

Folders: Lohmann, Cronite, Pose-Marre, Technoalloy, MANOIR PETRO-CHEM, AFE Technologies, NCK.

Drotlew A., Piekarski B. & Słowik J. (2017). The design of cast technological equipment for heat treatment furnaces. Archives of Foundry Engineering, 17(3), 31–36.

Bajwoluk A. & Gutowski P. (2017). The Effect of Cooling Agent on Stress and Deformation of Charge-loaded Cast Pallets. Archives of Foundry Engineering, 17(4), 13–18.

Bajwoluk A. & Gutowski P. (2019). Stress and crack propagation in the surface layer of carburized stable austenitic alloys during cooling. Materials at High Temperatures, 36(1), 9–18.

Piekarski B. (2010). Damage of heat-resistant castings in a carburizing furnace. Engineering Failure Analysis, 17(1), 143–149.

Kniaginin G. (1977). Metalurgia i odlewnictwo staliwa. Katowice: Wydawnictwo „Śląsk”.

Telejko I. (1986). Naprężenia i pęknięcia w odlewach staliwnych. In: Zarys metalurgii i odlewnictwa staliwa: praca zbiorowa. Cz. 2, Odlewnictwo, Ed. A. Staronka, Skrypty Uczelniane Akademia Górniczo-Hutnicza nr 1023, 180–224.

Downloads

Published

2020-03-31

How to Cite

Drotlew, A., & Piekarski, B. (2020). Connecting Castings for Operation under Conditions of Cyclic Temperature Changes. Journal of Casting &Amp; Materials Engineering, 4(1), 16–21. https://doi.org/10.7494/jcme.2020.4.1.16

Issue

Section

Articles